22-1/2 inch Flat Plastic Clothes Hanger, Black (Set of 3)
Here's a great hanger for use with your dress shirts, blouses, knit shirts, T-shirts or any other lighter garments. Most "standard" hangers down at the big box stores are only 15" - 16" wide. If you use them with plus sized garments the shoulders slump down and hang incorrectly and that can result in stretching and damage to your valuable clothes.
While 22-1/2" wide*, these hangers are flat and only 3/8" thick so that they actually give you more garment room in your closets. While they take up less room on the closet clothes hanging rod than most hangers, their thin and sleek appearance can be deceptive. A unique mechanical design using cross braces inside the hanger makes them strong enough to hold even heavier garments like leather jackets, uniforms or top coats with minimal flexing. Sold in bundles of three, these are great hangers to re-outfit your closet and protect your investment in your clothes. Black.
Features of this extra wide flat plastic hanger include:
Protect your investment in your clothes. This extra wide flat plastic hanger will help you optimize your closet space and eliminate narrow hangers that stretch the necks and shoulders of your shirts and blouses out of shape.
*Important Note: When upgrading to extra wide hangers be sure you have adequate closet clearance between the clothes hanging rod and the back wall of your closet. Probably not an issue for newer homes but it can be a problem with some older homes and some armoires. A good rule of thumb is that the distance from the center of the hanging rod to the back of the closet should be at least half the width of the widest hanger you intend to use plus at least one additional inch for garment clearance. For example, if using these 22-1/2" hangers the distance from the back wall of the closet to the center of the clothes rod would need to be at least 22-1/2" / 2 + 1" = 11-1/4" + 1 = 12-1/4".