20 inch Contoured Plastic Hanger, Black (Set of 3)
Here's a great contoured plastic hanger for use with your suits, suit coats, top coats, uniforms or any other garments which require a shaped shoulder to hang properly. Most standard curved hangers are only 16" - 17" wide and when they are used with plus sized coats the shoulders hang incorrectly and that can result in shoulder lumps, stretching and damage to your valuable clothes.
While 20" wide*, these hangers are comparable to standard width coat hangers in depth but much better for your clothes. They also include a pants bar that is non-slip coated to hold your folded suit pants or slacks. They include a swivel hook and the injection molded plastic is strong enough to hold leather jackets, uniforms or top coats with minimal flexing. Sold in bundles of three, these are great hangers to re-outfit your closet and protect your investment in your clothes. Black.
Features of this extra wide contoured plastic hanger include:
Protect your investment in your clothes. This extra wide contoured plastic hanger will help you optimize your closet space and eliminate narrow hangers that stretch the collars and ruin the shape of the shoulders of your coats.
*Important Note: When upgrading to extra wide hangers be sure you have adequate closet clearance between the clothes hanging rod and the back wall of your closet. Probably not an issue for newer homes but it can be a problem with some older homes and some armoires. A good rule of thumb is that the distance from the center of the hanging rod to the back of the closet should be at least half the width of the widest hanger you intend to use plus at least one additional inch for garment clearance. For example, if using these 20" hangers the distance from the back wall of the closet to the center of the clothes rod would need to be at least 20" / 2 + 1" = 10" + 1 = 11".